Toshiba B-EP4DL Series Maintenance Manual page 9

2. MAJOR UNIT REPLACEMENT
11) Close the front cover.
NOTES:
1. Make sure that the pins on the both sides of the front cover are fit in position, as shown in the
pictures below.
2. Do not reassemble the Front Cover while the Top Cover Open Button is pressed. Doing so may
cause the Top Cover not to open.
12) Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the printer
enclosure.
Fit the tabs A to D into the slots A' to D'.
Tab
Front Cover
Good
Tab B
Tab C
Pin
No Good
Top Cover Open Button
Tab D
2-5
2.1 Replacing the CPU PC Board
D'
C'
B'
A'
EO18-33023