Drive Specifications - Seagate ST1000LM014 Product Manual

2.0 D S
RIVE PECIFICATIONS
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the
phrases the drive and this drive are used throughout this manual to indicate the following drive models:
The specification summaries listed in the following tables are for quick reference. For details on specification measurement or definition,
refer to the appropriate section of this manual.
Table 1 Drive Specifications Summary
D S
RIVE PECIFICATION
(1)
Formatted capacity
Guaranteed sectors
Heads
Disks
Bytes per sector
NAND flash
Commercial Multilevel Cell (cMLC)
Recording density
Track density
Areal density
Spindle speed
Sustained data transfer rate OD
I/O data-transfer rate
ATA data-transfer modes supported
Cache buffer
Height
Width
Length
Weight (typical)
Average latency
Startup current (typical) 5V (peak)
Voltage tolerance (including noise)
Operating temperature
Nonoperating temperature (Ambient)
Temperature gradient (max)
Relative humidity
Relative humidity gradient
S L SSHD SATA P
EAGATE APTOP
ST1000LM014, ST1000LM015
ST1000LM028
AND
1TB
1,953,525,168
4
2
512 (logical) / 4096 (physical)
8GB
1894 Kb/in
375 Ktracks/in avg
705 Gb/in2 avg
5400 RPM
100 MB/s max
600 MB/s max
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
64MB
9.5 +/- 0.2 mm (0.374 +/-.008 in)
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
115 g (0.254 lb)
5.6 ms
1.0 A
5V ± 5%
0° to 60°C
–40° to 70°C
20°C per hour max (operating)
35°C per hour max (nonoperating)
5% to 95% (operating)
5% to 95% (nonoperating)
30% per hour max
M , R . C
RODUCT ANUAL EV
D S
RIVE
ST750LM000
750 GB
1,465,149,168
PECIFICATIONS
4