Recording And Interface Technology; Physical Characteristics; Seek Time; Start / Stop Times - Seagate ST1000LM014 Product Manual

2.3 R I
ECORDING AND NTERFACE
Interface
Recording method
Recording density
Track density
Areal density
Spindle speed
Sustained data transfer rate
I/O data-transfer rate
2.4 P C
HYSICAL HARACTERISTICS
Height
Width
Length
All models
Typical weight
Cache buffer
2.5 S
EEK TIME
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The
specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.

Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead.

Table 2 Typical seek times
Typical seek times (ms)
Track-to-track
Average
Average latency
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.
N
However, due to the manner in which these drives are formatted, benchmark tests that include
OTE
command overhead or measure logical seeks may produce results that vary from these specifications.
2.6 S /
TART STOP TIMES
Table 3 Start/stop times
Typical seek times (ms)
Power-on to ready (sec)
Power-on to ready (sec) (SED models)
Standby to ready (sec)
S L SSHD SATA P
EAGATE APTOP
T
ECHNOLOGY
Serial ATA (SATA)
Perpendicular
1894 Kb/in
375 ktracks/in avg
2
705 Gb/in avg
5400 RPM +/- 0.2%
100 MB/s max
600 MB/s max
9.5 +/- 0.2 mm (0.374 +/-.008 in)
69.85 +/- 0.25 mm (2.750 +/- 0.010 in)
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
115 g (0.254 lb)
64MB (65,536 KB)
Read
2.0
12.0
5.6
Typical
<1.0
TBD
<1.0
M , R . C
RODUCT ANUAL EV
°
Max @ 25 C
<1.0
TBD
<1.0
D S
RIVE PECIFICATIONS
6