Related Manuals for Seagate Barracuda Pro ST14000DM001
Summary of Contents for Seagate Barracuda Pro ST14000DM001
- Page 1 SATA Product Manual Standard 512E model ST14000DM001 ST12000DM001 ST10000DM001 100835983, Rev. A Gen 2 - June 2018...
- Page 2 Seagate, Seagate Technology and the Spiral logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. BarraCuda Pro, PowerChoice and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a cer- tification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.
-
Page 3: Table Of Contents
Seagate® Technology Support Services ........ - Page 4 S.M.A.R.T. commands............. . 51 Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 5: Seagate® Technology Support Services
For information regarding online support and services, visit: http://www.seagate.com/contacts/ For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/recover/ For Seagate OEM, Distribution partner and reseller portals, visit: http://www.seagate.com/partners/ Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 6: Introduction
Top Cover Attached motor for excellent vibration tolerance Worldwide Name (WWN) capability uniquely identifies the drive. NOTE Seagate recommends validating the configuration with the selected HBA/RAID controller manufacturer to ensure use of full capacity is supported. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 7: About The Serial Ata Interface
Shadow Register Block. All Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates parallel ATA, refer to the “Serial ATA: High Speed Serialized AT Attachment” specification. The specification can be downloaded from www.serialata.org. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 8: Drive Specifications
Voltage tolerance (including noise) 5V ± 5% 12V ± 10% Operating drive temperature 0° to 60°C (Drive Reported Temperature) Non-Operating temperature –40° to 70°C (Ambient Temperature, see sections 1.2.6.0.1 and 1.2.15) Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 9 Load-unload cycles 300,000 Supports Hotplug operation per Serial ATA Revision 3.3 specification *See Section 1.2.10, "Reliability" for rated MTBF device operating condition requirements. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 10: Formatted Capacity
COMMAND CHECK field value is taken from the DESCRIPTOR CHECK field in the descriptor specified by the SECTOR CONFIGURATION DESCRIPTOR INDEX field SECTOR CONFIGURATION DESCRIPTOR INDEX field specifies the Sector Configuration descriptor in the Set Sector Configuration log page Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 11 Bit Description 7 DESCRIPTOR VALID bit 6:0 Reserved Byte LOGICAL TO PHYSICAL SECTOR RELATIONSHIP SETTING field 2...3 Word DESCRIPTOR CHECK field 4...7 DWord LOGICAL SECTOR SIZE SETTING field 8...15 Bytes Reserved Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 12: Lba Mode
I/O data-transfer rate (MB/s max) 600 (Ultra DMA mode 5) 1.2.4 Start/stop times Power-on to Ready (sec) (typ/max) 23/30 Standby to Ready (sec) (typ/max) 23/30 Ready to spindle stop (sec) (max) Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 13: Power Specifications
0.324 7.67 Maximum DC (peak) 0.89 1.824 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 14 Drive specifications 1.2.5.1.1 Typical current profiles Figure 1. Typical 5V and 12V startup and operation current profiles Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 15: Conducted Noise
Idle Immediate also provide a method to directly transition the drive into supported power conditions. PowerChoice exits power saving states under the following conditions Any command which requires the drive to enter the PM0: Active state (media access) Power on reset Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 16 PowerChoice Supported Extended Power Condition Feature Subcommands EPC Subcommand Description Restore Power Condition Settings Go to Power Condition Set Power Condition Timer Set Power Condition State Enable EPC Feature Set Disable EPC Feature Set Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 17: Environmental Limits
Non-operating –40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. 1.2.6.1 Humidity The values below assume that no condensation on the drive occurs. -
Page 18: Shock
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 2–500 Hz 2.27 Grms ref Linear Random Freq (Hz) .001 .001 Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 19: Acoustics
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards. -
Page 20: Reliability
The drives are recognized in accordance with UL/cUL 62368 -1 and EN 62368 -1. 1.2.11.2 Regulatory Models The following regulatory model number represent all features and configurations within the series: Regulatory Model Numbers: STL006 Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 21: European Union (Eu) Ce Marking Requirements
Morocco Commodity Mark To satisfy our OEM customers, Seagate has added the Moroccan Commodity Mark to the drives provided to the OEM for the sale of Customer Kits produced by our OEM customers that are intended to be incorporated into the OEM's finished system-level product by an end user. -
Page 22: Taiwanese Bsmi
As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. -
Page 23: Environmental Protection
The European Union REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) Regulation (EC) 1907/2006 regulates chemicals shipped into and used in Europe. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the representations of our suppliers regarding the presence of REACH substances in these articles and materials. -
Page 24: Taiwan Requirements - Taiwan Rohs
CNS 15663, Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Seagate products must comply with the “Marking of presence” requirements in Section 5 of CNS 15663, effective January 1, 2018. This product is Taiwan RoHS compliant. -
Page 25: Reference Documents
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. Seagate will pay for transporting the repair or replacement item to the customer. -
Page 26: Configuring And Mounting The Drive
For installations which require cables, users can connect the drive as illustrated in Figure Figure 2. Attaching SATA cabling Each cable is keyed to ensure correct orientation. BarraCuda Pro Serial ATA drives support latching SATA connectors. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 27: Drive Mounting
MAX TORQUE 6 IN/LBS 1.028 26.11MM .138 ±.015 2.000 C L OF DRIVE Figure 3. Mounting configuration dimensions NOTE The image is for mechanical dimension reference only and may not represent the actual drive. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 28: Serial Ata (Sata) Interface
5V power 5V power Ground 2nd mate Ground or LED signal If grounded, drive does not use deferred spin Ground 1st mate. 12V power, pre-charge, 2nd mate 12V power 12V power Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 29: Supported Ata Commands
Flush Cache Extended Get Physical Element Status Identify Device Idle Idle Immediate Read Buffer Read DMA Read DMA Extended Read FPDMA Queued Read Log DMA Ext Read Log Ext Read Multiple Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 30 / D1 S.M.A.R.T. Read Data / D0 S.M.A.R.T. Read Log Sector / D5 S.M.A.R.T. Return Status / DA S.M.A.R.T. Save Attribute Values / D3 S.M.A.R.T. Write Log Sector / D6 Standby Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 31 Write FPDMA Queued Write Log DMA Ext Write Log Extended Write Multiple Write Multiple Extended Write Multiple FUA Extended Write Sectors Write Sectors Extended Write Stream DMA Extended Write Uncorrectable Extended Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 32: Identify Device Command
(Bit 12: 1) Sanitize feature set supported - Y (Bit 11: 1) Commands allowed during sanitize op as specified in ACS-3 - Y (Bit 10: 1) Sanitize Antifreeze Lock Ext command supported - Y Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 33 Total number of user-addressable LBA sectors available (see Section 1.2.2 for related ST14000DM001 = 27,344,764,928 information). These words are required for drives that support the 48-bit addressing ST12000DM001 = 23,437,770,752 feature. Maximum value: 0000FFFFFFFFFFFFh. ST10000DM001 = 19,532,873,728 104–105 ATA-reserved 0000 Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 34 Extended Number of User Accessible Sectors CBBC0000 - (4KN) 234-254 ATA-reserved 0000 Integrity word xxA5 NOTE See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 35 Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 36: Identify Device Data Log
Page number of the next supported ID data log page Page number of the last supported ID data log page 18..511 Reserved Copy of IDENTIFY DEVICE data 0..511 Copy of IDENTIFY DEVICE command data Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 37 Supported Capabilities page information header (QWord) Shall be set to 1 0..7 62:24 Reserved 23:16 Page number 8..15 Supported Capabilities (QWord) Shall be set to 1 62:55 Reserved advanced background operation supported persistent sense data reporting Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 38 Reserved read look-ahead supported volatile write cache supported smart supported flush cache ext supported Reserved 48-bit supported Reserved spin-up supported puis supported apm supported Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 39 Contents of the QWord are valid 32..39 62:4 Reserved nominal form factor 3.5” Write-Read-Verify Sector Count Mode 3 (QWord) Contents of the QWord are valid 40..47 62:32 Reserved 31:0 wrm mode 3 count Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 40 Contents of the QWord are valid 62:24 Reserved setting rate basis supported 22:9 Reserved 96..103 since power on rate basis supported Reserved power on hours rate basis supported Reserved date/time rate basis supported Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 41 Contents of the QWord are valid 128..135 62:32 Reserved 31:16 device maintenance polling time 15:0 abo recommended abo start interval Queue Depth (QWord) Contents of the QWord are valid 136..143 62:5 Reserved queue depth Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 42 Vendor Specific Supported Capabilities (QWord) 504..511 Contents of the QWord are valid 62:0 Vendor specific Current Settings Current Settings page information header (QWord) Shall be set to 1 0..7 62:24 Reserved 23:16 Page number Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 43 Contents of the QWord are valid 24..31 62:16 Reserved 15:0 dma sector time PIO Host Interface Sector Times (QWord) Contents of the QWord are valid 32..39 62:16 Reserved 15:0 pio sector time Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 44 31:16 time to performance degradation 15:0 minimum inactive time Advanced Background Operations Settings (QWord) Contents of the QWord are valid 80..87 62:8 Reserved abo_status 88..511 Reserved Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 45 FFFE Security Status (QWord) Contents of the QWord are valid 62:7 Reserved security supported master password capability 16..23 enhanced security erase supported security count expired security frozen security locked security enabled Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 46 (1, SED and ISE drives only) sanitize supported encrypt all supported 56..511 Reserved Parallel ATA 000..511 (Not supported for SATA drives) all zeros Serial ATA Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 47 Reserved sata gen3 signaling speed supported sata gen2 signaling speed supported sata gen1 signaling speed supported Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
- Page 48 SUPPORTED HARDWARE FEATURE CONTROL IDENTIFIER 44..47 Reserved Device Sleep Timing Variables (QWord) devslp timing variables supported 62:16 Reserved 48..55 15:8 devsleep exit timeout (deto) Reserved minimum devslp assertion time (mdat) 56..511 Reserved Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 49: Device Statistics Log
Number of Reallocation Candidate Logical Sectors Number of High Priority Unload Events General Errors Statistics Number of Reported Uncorrectable Errors Number of Resets Between Command Acceptance and Command Completion Physical Element Status Changed Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 50 Maximum Implicitly Open Zones Minimum Empty Zones Maximum Non Sequential Zones Zones Emptied Suboptimal Write Commands Commands Exceeding Optimal Limit Failed Explicit Opens Read Rule Violations Write Rule Violations 09..FE Reserved Vendor Specific Statistics Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A...
-
Page 51: Set Features Command
Enable read look-ahead (read cache) feature (default). Report full capacity available NOTE At power-on, or after a hardware or software reset, the default values of the features are as indicated above. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... -
Page 52: Commands
S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status NOTE If an appropriate code is not written to the Features Register, the command is aborted and 0x 04 (abort) is written to the Error register. Seagate BarraCuda Pro Serial ATA Product Manual, Rev. A... - Page 53 ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100835983, Rev. A...