User Interface And Display; Physical Specifications; Cable - AVM FRITZ!Box 3270 Installation, Configuration And Operation

User Interface and Display

16.3 User Interface and Display
•
•
16.4

Physical Specifications

•
•
•
•
•
•
16.5

Cable

Network Cable
The network cable (yellow) of the FRITZ!Box 3270 is a stan-
dard category 5 (Cat 5) Ethernet cable. Please use a standard
STP-type (Shielded Twisted Pair) Ethernet cable of category 5
(Cat 5) to replace or extend the Ethernet cable. To extend the
cable you will need a shielded RJ45 double coupling (Cat 5)
with a 1:1 pin assignment. You can use both straight cables
and crosslink cables. All components are available from spe-
cialized vendors.
When components of a category smaller than Cat 5 are used,
reduced transmission rates may result.
AVM recommends using a network cable no more than
100 meters long.
Settings and status messages via a web browser on a
connected computer
Five LEDs indicate the condition of the device
Dimensions (W x D x H): approx. 210 x 155 x 25 mm
Supply voltage: 230 V / 50 Hz
Maximum power consumption: 12 W
Firmware can be updated
Conform to CE standards
Ambient conditions
– operating temperature: 0°C – +40°C
– storage temperature: -20°C – +70°C
– relative humidity (operation): 10% – 90%
– relative humidity (idle): 5% – 95%
97