User Interface And Display; Physical Specifications; Cable - AVM FRITZ!Box 6320 Cable Installation, Configuration And Operation

Cable connection
Table of Contents

Advertisement

User Interface and Display

16.3
User Interface and Display
16.4

Physical Specifications

16.5

Cable

Network Cable
The network cable (yellow) of the FRITZ!Box 6320 Cable is a
standard category 5 (Cat5) Ethernet cable. Please use a stan-
dard STP-type (Shielded Twisted Pair) Ethernet cable of cate-
gory 5 (Cat 5) to replace or extend the Ethernet cable. To ex-
tend the cable you will need a shielded RJ45 double coupling
(Cat 5) with a 1:1 pin assignment. You can use both straight
cables and crosslink cables. All components are available
from specialized vendors.
When components of a category smaller than Cat 5 are used,
reduced transmission rates may result.
AVM recommends using a network cable no more than 100
meters long.
Settings and status messages via a web browser on a
connected computer
Five LEDs indicate the condition of the device
Dimensions (WxDxH): approx. 185 x 140 x 35 mm
Supply voltage: 230 V / 50 Hz
Maximum power consumption: 11 W
Firmware can be updated
Conform to CE standards
Ambient Conditions
operating temperature: 0°C – +40°C
storage temperature: -20°C – +70°C
relative humidity (operation): 10% – 90%
relative humidity (idle): 5% – 95%
114

Advertisement

Table of Contents
loading

Table of Contents