LEDs
The various front panel LEDs have the following meaning:
•
LAN / Netlink
Status
Off
On
Blink
•
UPS / Fail
Status
Off
On
•
Active
Status
Off
Blink
2.3
FEATURES
Each SNMP/Web adapter provides the following features:
•
10/100 Mpbs connection speed
•
Use of DHCP / BOOTP or manual configuration for the TCP/IP network settings
•
SNMP Agent
•
Web server
•
Console interface
•
UPS status / alarms / readings, event logging over different interfaces
•
Digital outputs (open-collector outputs for relay drive) – 1-ph plug-in version only
•
SNMP Traps and E-mail notification upon UPS event
•
Advanced security features
2.4
ARCHITECTURE
ARCHITECTURE DIAGRAM
UPS
Modifications reserved
ISG_CNT_SNM_BAS_CRD_1GB_V012.doc
Meaning
No LAN connection detected
LAN connection established, no communication
LAN connection established, receive or transmit active
Meaning
OK / No Fault
No UPS Connection
Meaning
Fault of device
Device OK / No fault
10/100 Mbit/s
UTP
1:1 RS232
Contact i/f
(1-ph plug-in version only)
Windows
Linux
UNIX
Ethernet
Local console
NOTE:
only required for
configuration
Page 12/24
Installation Guide SNMP/Web Adapter