Shipping The Scanner - Microtek ScanMaker i800 Plus Supplement Manual
Features, scenarios, and information
Hide thumbs
Also See for ScanMaker i800 Plus:
- Start here manual (8 pages) ,
- Start here manual (10 pages)
Table of Contents
Advertisement
Shipping the Scanner
If you have to transport the scanner, you will need to lock the scanner and TMA
back. Follow the steps below:
1. Turn off the scanner if your scanner is on.
2. Turn the scanner back on. The carriages of the scanner and TMA will move to the
standby position in a few moments.
3. When the lights on the front panel of your scanner stop blinking, push the
locking switch at the base of the TMA to the "Locked" position.
4. Push the locking switch at the bottom of the scanner to the "Locked" position.
5. Turn off your scanner. The scanner is now ready for transport.
Locked
Locked
ScanMaker i800 Plus Supplement
5
Advertisement
Table of Contents
Need help?
Do you have a question about the ScanMaker i800 Plus and is the answer not in the manual?