Scanning Film (2) - Microtek ScanMaker i280 Supplement Manual

18 ScanMaker i280 Supplement
E. Scanning Film (2)
This scenario uses the ScanWizard EZ - Professional Mode.
1. Raise the scanner lid, then follow the procedures in the "Using the LightLid 35 III"
section to load the film and to place the film adapter on the scanner glass surface.
2. Follow the procedures (step 2 and 3) in "Scanning Photos (3)" to activate the
ScanWizard EZ - Professional Mode.
3. In the Preview window of the Professional Mode, click the
Scan Material button to choose Positive Film for
transparencies and slides; choose Negative Film for
negatives, depending on the film type you are using.
4. Click the Overview button to perform a preliminary scan of
the film loaded onto the scanner.
5. In the Preview window, you can resize the scan frame (floating dotted line) around
the image by dragging on the edge or corner of the scan frame to determine the
final size of the actual scan.
6. Specify your scanning requirements in the Settings window.
a) Select a desired image type.
b) Select a desired resolution.
c) Adjust the scan frame settings if necessary.
7. Adjust image quality if necessary, using the Advanced Image Correction (AIC) tools.
8.. If the colors in your film sample are faded and need restoring, check the
"Automatic Color Restoration" box in the Settings window.
9.. Click the Scan to button in the Preview window to scan all the checked jobs.
When the "Scan To: Save As" dialog box
appears, specify the folder location, a file
name, and the format for the output image,
then click Save. The image is scanned and
saved to the specified location.