Torch - Fluke Ti100 User Manual

Ti100, Ti110, Ti125, TiR110, TiR125
Users Manual
The laser pointer selections are Trigger Laser, Trigger Torch, and Laser/Torch.
When set, pull the secondary trigger to turn on, release the secondary trigger to
turn off.
To prevent eye damage and personal injury, do not look into
the laser. Do not point laser directly at persons or animals or
indirectly off reflective surfaces.
To set:
1. Push V.
2. Push R/S to highlight Camera.
3. Push U or Y to view the menu.
4. Push R/S to highlight Laser/Torch.
5. Push U or Y to view the menu.
6. Push R/S to highlight an option.
7. Push U to set the option.
8. Push:
U to set the change and go back to the live view.
V or X to set the change and go back to the previous menu.
W to cancel the change and go back to the live view.
The laser warning symbol (*) shows in the Header zone of the display when
the laser is turned on and you pull the secondary trigger.

Torch

The torch illuminates darker work areas. When set, pull the secondary trigger
to operate.
When the torch is on and an image is captured, the torch momentarily
shines brighter and functions as a visible camera flash.
To set:
1. Push V.
2. Push R/S to highlight Camera.
34
W* Warning
Note