Selecting Operation; Traffic Information - Kenwood DNX7310BT Instruction Manual

Return to the Top page
Radio, TV
Manual memory
You can store the current receiving station or
channel in memory.
1
Select a station or channel you wish
to store in memory.
NOTE
• For TV, touch center bottom area of the screen if
source control screen is not displayed.
2
Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.

Selecting Operation

Preset select
You can list and select memorized station or
channel.
Selecting from the multi function menu
1
Touch the desired number from P1
to P6.
The unit will tune to the selected station
or channel.
Selecting from the preset list
1
Touch illustrated area.
List Control screen appears.
2
Select a station or channel from the
list.
50 50
Search by program type
(FM tuner only)
You can tune to a station with a specific
program type when listening to FM.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [PTY] in the multi function
menu.
TUNER PTY Mode screen appears.
3
Select a program type from the list.
4
Touch [Search].
You can search a station of the selected
program type.

Traffic Information

(FM Tuner Only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System that includes the TI information.
1
Touch [ ] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
Return to the Top page
Radio, TV
51