Table of Contents
Advertisement
Return to the Top page
Radio, TV
R
adio and TV Operation
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
•
Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode
(P.95).
Simple Control screen
1
2
3
4
1 PS/Station name display
Displays the PS name.
2 Information display/Control switching area
Displays the following information.
• [FM1] etc.: Band display
• MHz/kHz: Frequency display
• Preset #: Preset number
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu
4 Preset key/Multi function menu
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see Multi function menu
5 Sub function key
Touch to display "Sub function menu" (7 in this table).
6 Preset list
Displays the list of preset stations or channels and the information.
44
44
List Control screen
5
3
8
4
(P.45).
(P.45).
7 Sub function menu
The following functions can be performed by using keys in this area.
• Switches the band: Touch [AM] or [FM].
• Tunes in a station: T
The bar in center (tuner only) shows the current frequency location.
8 List switching key
Touch to switch between the preset list and the information list.
In tuner mode, radio text plus will be displayed (for models with region code 2 or 3 only).
Multi function menu
2
The functions of each key are as follows.
6
[P1] - [P6]
Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.
7
[
]
Displays the list of preset stations or channels.
[TI] (FM Tuner for models with region code 2 or 3 only)
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see Auto memory
[PTY] (FM Tuner for models with region code 2 or 3 only)
Searches a program by setting program type. For details, see Search by program type
[CRSC] (FM Tuner for models with region code 4 or 6 only)
Switches to monaural to decrease noise when reception is poor.
[MONO] (FM Tuner for models with region code 2 or 3 only)
Select the Monaural reception.
[LO.S] (FM Tuner for models with region code 2 or 3 only)
Turns the Local Seek function on or off.
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up
[
AUDIO]
Touch to display the Audio Control screen. See Controlling Audio
[
EXT SW]
Touch to control the external device power supply. For details, see External Device Control
[ REAR
]
Touch to mute the rear speaker.
ouch [1] [¡]. The method of frequency switching can be changed. See Multi
function menu
(P.45).
Traffic Information
(P.49).
(P.68).
(P.82).
Return to the Top page
Radio, TV
(P.51).
(P.50).
(P.81).
45
Hide quick links:
Advertisement
Table of Contents
