Navigation Setup; Camera Setup - Kenwood DNX7310BT Instruction Manual

Return to the Top page
Setting Up

Navigation Setup

You can set navigation parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Navigation].
Navigation SETUP screen appears.
4
Set each item as follows.
78 78
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: U ses the front left side speaker for
voice guidance.
Front R: U ses the front right side speaker for
voice guidance.
Front All (Default): U ses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is "25".
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is "ON".

Camera Setup

You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
Return to the Top page
Setting Up
Rear Camera* 1
Selects the type of rear camera to use.
CMOS-3xx: W hen the CMOS-300 series with ID
1 set is connected.
Other (Default): W hen the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: S witches to the rear view camera video
display when shifting to reverse or
pressing the <AUD> or
<SCRN> button for 1 second.
OFF (Default): S witches to the rear view
camera video display when
pressing the <AUD>
or <SCRN>
button for 1 second.
R-CAM Settings* 2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera*
1
Turn this setting on when the CMOS-300 series
with ID 2 set is connected. Setting values are
ON and OFF. Default is "OFF".
F-CAM Settings*
3
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 T hese settings become settable only when
the parking brake is on.
*2 T his setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 T his setting becomes settable only
when the parking brake is on and "Front
Camera" is set to [ON].
79