Download Print this page

YAMAHA YZ250F(Y) Owner's Service Manual Page 121

Hide thumbs

Advertisement

HANDLING NOTE
Support the machine securely so
there is no danger of it falling over.
REMOVING THE DRIVE
SPROCKET
1. Remove:
• Nut (drive sprocket) "1"
• Lock washer "2"
• Straighten the lock washer tab.
• Loosen the nut while applying the
rear brake.
2. Remove:
• Drive sprocket "1"
• Drive chain "2"
Remove the drive sprocket together
with the drive chain.
REMOVING THE ENGINE
1. Remove:
• Pivot shaft "1"
If the pivot shaft is pulled all the way
out, the swingarm will come loose. If
possible, insert a shaft of similar di-
ameter into the other side of the swin-
garm to support it.
2. Remove:
• Engine "1"
From right side.
Make sure that the couplers, hoses
and cables are disconnected.
INSTALLING THE ENGINE
1. Install:
• Engine "1"
Install the engine from right side.
• Pivot shaft "2"
Pivot shaft:
85 Nm (8.5 m•kg, 61
ft•lb)
• Engine mounting bolt (lower) "3"
Engine mounting bolt
(lower):
53Nm (5.3 m•kg, 38
ft•lb)
• Lower engine bracket "4"
• Bolt (lower engine bracket) "5"
Bolt (lower engine brack-
et):
34 Nm (3.4 m•kg, 24
ft•lb)
• Patch "6"
• Engine mounting bolt (front) "7"
Engine mounting bolt
(front):
53 Nm (5.3 m•kg, 38
ft•lb)
• Upper engine bracket "8"
• Bolt (upper engine bracket) "9"
Bolt (upper engine brack-
et):
34 Nm (3.4 m•kg, 24
ft•lb)
• Engine mounting bolt (upper) "10"
Engine mounting bolt
(upper):
55 Nm (5.5 m•kg, 40
ft•lb)
• Lower engine guard "11"
• Bolt (lower engine guard) "12"
Bolt (lower engine
guard):
10 Nm (1.0 m•kg, 7.2
ft•lb)
• Apply the molybdenum disulfide
grease on the pivot shaft.
• Install the patch with the claw "a"
facing outside the chassis.
4-51
ENGINE REMOVAL
INSTALLING THE BRAKE PEDAL
1. Install:
• Spring "1"
• Brake pedal "2"
• O-ring "3"
• Bolt (brake pedal) "4"
Bolt (brake pedal):
26 Nm (2.6 m•kg, 19
ft•lb)
• Clip "5"
Apply the lithium soap base grease
on the bolt, O-rings and brake pedal
bracket.
INSTALLING THE DRIVE
SPROCKET
1. Install:
• Drive sprocket "1"
• Drive chain "2"
Install the drive sprocket together
with the drive chain.

Advertisement

This manual also for:

Yz250f 2009, Yz250fy 2009

Comments to this Manuals

Symbols: 0
Latest comments:
  • Dave May 30, 2016 02:21:
    Really good really good really goodj