Yamaha YZ250F(Y) Owner's Service Manual page 102

Table of Contents

Advertisement

Apply the engine oil on the primary
driven gear inner circumference.
2. Install:
• Lock washer "1"
• Nut (clutch boss) "2"
Nut (clutch boss):
60 Nm (6.0 m•kg, 43
ft•lb)
Use the clutch holding tool "3" to hold
the clutch boss.
Clutch holding tool:
YM-91042/90890-04086
A. For USA and CDN
B. Except for USA and CDN
3. Bend the lock washer "1" tab.
4. Install:
• Friction plate "1"
• Clutch plate 1 "2"
• Install the clutch plates and friction
plates alternately on the clutch
boss, starting with a friction plate
and ending with a friction plate.
• Apply the engine oil on the friction
plates and clutch plates.
5. Install:
• Bearing "1"
• Washer "2"
• Circlip "3"
To push rod 1 "4".
Apply the engine oil on the bearing
and washer.
6. Install:
• Push rod 2 "1"
• Ball "2"
• Push rod 1 "3"
Apply the engine oil on the push rod
1, 2 and ball.
7. Install:
• Pressure plate "1"
4-32
CLUTCH
8. Install:
• Clutch spring "1"
• Bolt (clutch spring) "2"
Bolt (clutch spring):
10 Nm (1.0 m•kg, 7.2
ft•lb)
Tighten the bolts in stage, using a
crisscross pattern.
9. Install:
• Dowel pin "1"
• Gasket (clutch cover) "2"
10. Install:
• Clutch cover "1"
• Bolt (clutch cover)
Bolt (clutch cover):
10 Nm (1.0 m•kg, 7.2
ft•lb)
Tighten the bolts in stage, using a
crisscross pattern.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 yz250f2009 yz250fy

Table of Contents