4 Replacement Procedures
4.5
SSD
CAUTION: Take care not to press on the top or bottom of the SSD. Pressure may cause
data loss or damage to the device.
Removing the SSD
To remove the SSD, follow the steps below and refer to Figure 4-7.
1. Remove the following screws and disconnect the SSD from the connector CN1910
on the system board.
• M2×3.5C
CN1910
4-20
[CONFIDENTIAL]
×2
BIND
M2x3.5C BIND
SSD
Figure 4-7 Removing the SSD
PORTÉGÉ Z830/835/Satellite Z830 Maintenance Manual (960-883)
4.5 SSD