Note: The LSM management software determines what happens when you enter
Figure 3–2.
Entering a Cartridge through the Cartridge Access Port
3–4
a cartridge upside down or with an unreadable label. Under normal
conditions, the camera on the hand audits the CAP and recognizes that a
cartridge is present, but the hand does not move it. You must remove the
cartridge from the CAP. With some software, the LSM might stop
operating. With other software, you are prompted to type in a label number
when no VOLSER is read. If you do type in a label number, you might
cause a problem later during an audit, because the camera still will not be
able to read a VOLSER on the cartridge.
Hardware Operator's Guide