Setting Write Protect Switch; Figure 4-3. Setting The Write Protect Switch - HP Surestore Tape Library Model 6/100 Hardware Operator's Manual

Setting Write Protect Switch

Refer to Figure 4–3 to see the location of the write protect switch. To set the
cartridge to write protected, slide the switch to the left so the orange indicator is
visible. In this position, the drive can only read data from the tape and cannot write
data to the tape.
To set the cartridge to write enabled, slide the switch to the right so the orange
indicator is not visible. In this position, the drive can write as well as read data.
Figure 4–3. Setting the Write Protect Switch
4–4
Hardware Operator's Guide