Controls, Indicators, And Configuration; Lsm Operator Panel - HP Surestore Tape Library Model 6/100 Hardware Operator's Manual

Library storage module

Hide thumbs Also See for Surestore Tape Library Model 6/100:

Table of Contents

Chapter 2.

Controls, Indicators, and Configuration

This chapter shows the locations and describes the functions of the library storage

module (LSM) operator panel and the power switch. It also shows how to set the

Small Computer Systems Interface (SCSI) address and the maximum usage count

of the cleaning cartridge. Refer to the drive publications for information about

operating the drives.

The LSM operator panel is on the front cover of the LSM. The panel contains

softkeys and indicators, plus a two-line display. The display shows LSM status,

configuration, test sequences, and error information. Figure 2–1 shows the panel

and describes each item.

You use this panel to:

Resolve machine problems.

If an error occurs, the display shows a fault symptom code (FSC) that you can

give to the customer engineer to help resolve problems. Write down the FSC

as soon as it is displayed.

Receive instructions to close the door or cartridge access port (CAP).

Set the SCSI robotic address.

Set the maximum usage count of the cleaning cartridge.

2–1

Table of Contents

A4846a