HP Integrity Superdome 2 16-socket User Manual page 50

Parameter
TRUSTMODE
CERTLIST
XENAMELIST
HPQLA2X00FO
HPQLA2X00FORCE
OAUID
OAPWD
50 Using scripts to deploy updates
Description
access granted to local users. (Applies to
Linux PSP only.)
HP Systems Management Homepage uses
this parameter to set up the trust
relationship mode. (Applies to Linux PSP
only.)
Enables you to provide a list of certificate
files or servers where certificates can be
obtained for trust relationships for the HP
Systems Management Homepage.
(Applies to Linux PSP only.)
Enables you to provide a list of servers,
separated by semicolons, for trust
relationships for the HP Systems
Management Homepage. (Applies to
Linux PSP only.)
This parameter is valid only if the
TRUSTMODE parameter is set to
TrustByName. (Applies to Linux PSP
only.)
The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine
the failover mode to use. (Applies to Linux
PSP only.)
The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine
whether to skip detection of third-party
storage. (Applies to Linux PSP only.)
Provides the user name credentials for the
OA associated with VC. You must define
a value of these variables before the HOST
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
You can also use OAUSER or
OAUSERNAME.
Provides the password credentials for the
OA associated with VC. You must define
a value of these variables before the HOST
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
You can also use OAPASSWORD.
Possible values
provides full access to any user who has
access to the local console, without
prompting for a user name or password.
TrustByCert—If you use this value, you
must define the CERTLIST parameter
to enable access to the server.
TrustByName—If you use this value, you
must define the XENAMELIST.
TrustByAll—HP does not recommend
using this value because of possible
negative security consequences.
CAUTION: The accepted values are
case-sensitive and must be capitalized
as shown. Failure to do so prevents the
trust relationship from being set up
properly during installation and might
affect access to the web server.
Certificate file name or Server DNS name
Server DNS name
SinglePath
SecurePath
QLogicFailure
NOTE: No default value
Y, N (default)
User can define the OAUID variable
multiple times before each HOST variable.
User can define OAPWD variable multiple
times before each HOST variable.