Linux Smart-Component Return Codes; Linux Rpm Return Codes - HP Integrity Superdome 2 16-socket User Manual

Linux smart-component return codes

Single-target servers:
Error level
0
1
2
3
Multi-target servers:
Error level
0
1
2
3
4
5
6
7

Linux RPM return codes

Error level
0
1
42 Using scripts to deploy updates
Meaning
The smart component was installed successfully.
The smart component was installed successfully, but the
system must be restarted.
The installation was not attempted because the required
hardware is not present, the software is current, or there
is nothing to install.
The smart component was not installed. For more
information, see the log file.
Meaning
The installation of the deliverable was successful. No reboot
is required.
The installation of the deliverable was successful. Reboot
is required for the deliverable to be enabled.
The installation was not attempted because the version to
be installed matches the version already installed.
The installation was not attempted because of one of the
following:
The version to be installed is older than the version
already installed.
The supported hardware is not present, not enabled,
or in a state that an installation could not be attempted.
The smart component does not support the environment.
There is nothing for the component to accomplish.
If the component is being installed to a remote target, such
as an OA or other network-based deployment, this return
code indicates that the target cannot be found.
A user canceled the installation before anything could be
installed.
The installer cannot run because of an un-met dependency
or installation tool failure.
The actual installation operation (not the installation tool)
failed.
Meaning
The Linux RPM installation was successful.
The Linux RPM installation failed.