HP Integrity Superdome 2 16-socket User Manual page 46

Parameter
USESNMP
USEWMI
ROMONLY
SOFTWAREONLY
USECURRENTCREDENTIAL
WEBUPDATENEEDED
USEPROXYSERVER
USEPROXYSCRIPT
DELETEINPUTFILE
ONFAILEDDEPENDENCY
46 Using scripts to deploy updates
Description
Specifies that components that use SNMP
protocol, are available to be selected for
installation.
These components are available for
selection by default. When the /usesnmp
parameter is used, and the /usewmi
parameter is not used, the WMI
components are optional. This parameter
does not apply to HP Integrity servers.
Specifies that components that use WMI
protocol are available to be selected for
installation.
These components are optional by default
and are not installed unless this parameter
is used. When the /usewmi parameter
is used, and the /usesnmp parameter is
not used, the SNMP components are
optional. This parameter does not apply
to HP Integrity servers.
This is a filter switch that allows you to
view only the firmware components
required for installation.
Do not use the /romonly parameter with
the /softwareonly parameter.
This is a filter switch that allows you to
view only the software components
required for installation.
Do not use the /softwareonly
parameter with the /romonly parameter.
Enables the credentials of the local host
to be used as the credentials to access the
targets instead of providing the user name
and password explicitly for each target.
The assumption is that the current
credentials are valid for the targets that
are being accessed. (Applies to Windows
operating systems only.)
Instructs HP SUM to include the
components from the HP FTP site
ftp.hp.com) in the list of possible updates.
Use a proxy server (and port number) to
access the HP FTP site (ftp://ftp.hp.com).
Include a proxy script to access the HP
FTP site (ftp://ftp.hp.com).
Instructs HP SUM to delete the input file
after it has been read.
This parameter instructs HP SUM how to
proceed when a component has a failed
dependency.
The default of OmitHost causes the host
to be put in a failure state, and no
installation is attempted on it.
Possible values
YES, NO
YES, NO
YES, NO
YES, NO
YES, NO
YES, NO
(ftp://
String value
For example, 1 1.22.33.44:80
Web URL (for example, autoproxy.com)
YES, NO (default)
OmitHost (default), OmitComponent,
Force