Figure 5-18 Insert The Blade; Figure 5-19 Tighten The Locking Screws - HP Disk Carrier Blade for bh3710 Installation Manual

NOTE
Figure 5-18 Insert the Blade
Step 6. Tighten the small screws in each locking lever (as shown in Figure 5-19). This completes the
installation.
Figure 5-19 Tighten the Locking Screws
Chapter 5
The blue LED will briefly illuminated when power is reestablished as the blade
mates with the backplane connectors.
hp Carrier Grade Server bh3710 Server Blade Installation Information
Installing and Removing Blades
5-23