Figure 5-23 Pull Blade From Chassis - HP Disk Carrier Blade for bh3710 Installation Manual

hp Carrier Grade Server bh3710 Server Blade Installation Information
Installing and Removing Blades
Step 4. Still grasping the locking levers, firmly pull the blade from the chassis (Figure 5-23). The blade
connectors fit snugly in the backplane and it may take additional effort to disengage the blade from
the backplane.
Figure 5-23 Pull Blade From Chassis
Step 5. Extract the blade completely from the chassis and carefully place it on an antistatic-protected area.
This concludes blade removal.
5-26
Chapter 5