About This Manual; Additional Documentation - HP Cluster Platform Interconnects v2010 Manual

This manual describes the Myricom Myrinet system interconnects used in some
HP Cluster Platform solutions.
This manual does not describe the procedures and tools that are required to install
and configure the system hardware or software. It does contain references for
cluster components that have their own documentation.
Audience
This manual is intended for experienced hardware system administrators. The
information in this manual assumes that the end user:
• Is familiar with HP rack-mounted servers and associated rack hardware
• Is familiar with basic networking concepts, network switch technology, and
network cables
• Is familiar with HP cluster architecture and concepts
Organization
This manual is organized as follows:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6

Additional documentation

More information about cluster components can be found in the documentation set
that shipped with your cluster. More information about the Myricom interconnects
can be found on the Myricom Web site, http://www.myri.com. You can search
for additional HP documents online at http://docs.hp.com.
Providing feedback
HP welcomes your comments on this manual. Please send your comments and
suggestions by email to readers_comment@zk3.dec.com.

About This Manual

Presents an overview of the Myrinet-2000
system interconnects.
Presents an explanation of the Myricom PCI
cards.
Describes the 8-port infiniband and gigabit
ethernet switch cards, spine cards and
monitoring line cards.
Presents an explanation of the LEDs and
some diagnostic procedures.
Provides instructions for replacing some
components in the system interconnect.
Describes how to power up the system
interconnect, its operating temperatures
and its specificiations.
About This Manual v