Kit Contents; Bracket; Fabric Strap - HP Cluster Platform Hardware Kits v2010 Installation Manual

Note:
This bracket is designed to support different types of cables, from 5/16-inch (7.9-mm) minimum
diameter to 5/8-inch (15.9-mm) maximum diameter. Refer to the documentation supplied with
your cluster before installing the brackets and routing the cables.

1.5 Kit Contents

The AC070A cable management kit contains the following components:
• The bracket shown in
Figure 1-1 Bracket
The bracket is adaptable for use in several HP Cluster Platform configurations, and might
also be applicable in other cable management applications (refer to your hardware installation
documentation). The following bracket features are shown in
1
2
• Two 3.5-inch (89-mm) fabric straps (see
Figure 1-2 Fabric Strap
1
Each strap has a hook-and-loop fabric closure (callout 1) and a metal D-ring (callout 2) that
is designed to secure a single interconnect cable. The straps are secured to the bracket through
a metal grommet (callout 3).
• The fasteners that are specified in
Figure 1-1.
The mounting face, which contains three mounting slots. You attach cable
management straps to this part of the bracket.
Mounting holes, which you use to attach the bracket to the rack, or to a server's
rail kit.
2
1
Figure 1-2) that mount on the bracket.
3
Table 1-1.
Figure 1-1:
1.5 Kit Contents
2
7