Replacing The Fan Module; Figure 15. Fan Module Replacement - HP Carrier-grade cc2300 Product Manual

Replacing the Fan Module

To replace the fan module, follow this procedure:
1. Disconnect the fan module's power cable from the server board.
2. Press in on the plastic catch (A in Figure 15) to release the fan module.
3. Swing the fan module upward (B in Figure 15) and lift it out of the chassis.
NOTE
When replacing the fan module, verify that the chassis attachment point and
the mating notch on the end of the fan module opposite the latch have fully
engaged.
cc2300 Carrier Grade Server Product Guide

Figure 15. Fan Module Replacement

69