Main Menu - HP Carrier-grade cc2300 Product Manual

The BIOS Setup program menu bar is shown below.
Main Advanced
Allocates Configures
resources advanced
for hardware features available
components. through the
chipset.

Main Menu

You can make the following selections on the Main Menu. Use the submenus indicated by "►" for
other selections.
Feature
System Time
System Date
Floppy A
Hard Disk Pre-Delay
► Primary IDE Master
► Primary IDE Slave
► Processor Settings
Language
Primary IDE Master and Primary IDE Slave Submenus
Feature
Type
LBA Mode Control
Multi-Sector
Transfers
PIO Mode
Ultra DMA
cc2300 Carrier Grade Server Product Guide
Security
Sets
passwords
and security
features.
Option
HH:MM:SS
MM/DD/YYYY
Not installed
[1.44/1.25 MB 3 ½]
2.88 MB 3 ½
[Disabled]
3 Seconds
6 Seconds
9 Seconds
12 Seconds
15 Seconds
21 Seconds
30 Seconds
<Enter>
<Enter>
<Enter>
[English (US)]
Español (SP)
Deutsch (DE)
Italiano (IT)
Français (FR)
Option Description
None Select the type of device that is attached to the IDE channel.
[Auto] If you select User, you will need to enter the parameters of
the IDE device (cylinders, heads and sectors).
N/A This field informational only.
N/A This field informational only.
N/A This field informational only.
N/A This field informational only.
Server Boot
Selects serial port, Selects boot
LAN, and event log options and
features. Also power
permits service supply
boot. controls.
Description
Sets the system time.
Sets the system date.
Selects the diskette type. Note: The 1.25 MB
3 ½-inch references a 1024 Byte sector Japanese
media format. Support for the 1.25, 3 ½-inch format
requires a 3 ½ "3-mode" diskette drive.
Adds a delay before first access of the hard drive to
accommodate slow spin-up hard disk drives.
Enters submenu.
Enters submenu.
Enters submenu.
Selects which language BIOS displays.
Exit
Saves or
discards changes
to set program
options.
43