HP Carrier-grade cc2300 Product Manual page 28

Table 6. Software Security Features (continued)
Feature
Control access to the system
other than SSU: set user
password
Boot without keyboard
Specify the boot sequence
28
Description
To control access to using the system, set a user password and enable it
through Setup.
To disable a password, change it to a blank entry or press CTRL-D in the
Change Password menu of the User Password Option menu found in the
Security Subsystem Group.
To clear the password if you cannot access Setup, change the Clear
Password jumper (see Chapter 5).
The system can boot with or without a keyboard. During POST, before
the system completes the boot sequence, the BIOS automatically detects
and tests the keyboard if it is present and displays a message.
The sequence that you specify in setup will determine the boot order. If
secure mode is enabled (a user password is set), then you will be
prompted for a password before the server fully boots. If secure mode is
enabled and the "Secure Boot Mode" option is also enabled, the server
will fully boot but will require a password before accepting any keyboard
or mouse input.
cc2300 Carrier Grade Server Product Guide