Advertisement
DCFM 10.3.3 fixes
Table 7
lists the defects that were closed for this release.
Table 7 DCFM 10.3.3 fixes
Closed defect summary
Webtools does not launch from DCFM, and errors are reported.
After making changes in the Advanced settings of the Edit FCIP Tunnel
dialog, clicking OK does not save the changes.
A memory leak caused management application services (Web Server,
built in ftp) and the main server to stop.
An encryption switch in an Encryption Group (EG) initially configured
with KV1, registered a new key vault (KV2). However, DCFM continues
to show KV1 as the key vault.
The DCFM service that processes the SNMP traps hangs, and collectors
are not triggered.
A null pointer exception occurs in the Server Console when Fusion 2.7
is connected to DCFM 10.3.2, preventing users from retrieving fabric
details.
After a configuration is copied in a FICON environment, the Product
Tree is not updated immediately, even though the configuration is
saved in the switch.
When moving ports from the default switch to the logical switch or
vice versa, DCFM takes from 5 minutes to more than 40 minutes to
reflect the changes in the GUI.
When a tunnel is deleted, the Delete Progress dialog displays the
wrong GbE port format (slot/port for the 1606 extension switch and
wrong slot number for the multiprotocol router blade and multiprotocol
extension blade).
After a virtual fabric-enabled chassis is unmonitored, its name continues
to appear in the Configure Logical Switches dialog.
When opening the Configure/CEE dialog for the first time, the display
sorts the MAC Address column instead of the Port number column.
B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional
Solution
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
Fixed in DCFM 10.3.3
45
Advertisement
