Advertisement
No ISL link is reflected in the Topology after performing a port disable
and a port enable on the HP StorageWorks 2/128 SAN Director.
After migrating to DCFM 10.3.0, WebTools is not launched for the
switches in the SSL enabled server.
An internal error is observed when the SNMP credentials are modified
for the discovered switches via Edit Discovery dialog after initial dis-
covery
The FICON Merge wizard indicates a merge operation success, but
the Master Log indicates that the merge operation failed, leading to
confusion if the operation succeeded or failed.
A yellow banner is displayed in the ACL tab of Edit switch. Add LAG
dialog is not appropriate, or in accordance with Functional Specifica-
tion
When the client is idle for an extended period of time, connection with
the server is lost and the error message unable to recover con-
nection to server is displayed.
WebTools session expires before the session timeout value is reached,
and OutOfMemoryError Exception is displayed when launched
from DCFM.
Mi10k is not mangeable after migration from EFCM to DCFM 10.3.0.
A trap forwarding issue occurs when the client IP matches the trap re-
cipient IP, and the user cannot add the IP address of the machine in
which the client is running.
Importing firmware to a repository fails with inappropriate error mes-
sages, leading to user confusion. Fix revises the message to a single
generic message Firmware could not be imported to re-
pository. There may not be enough disk space.
When an Access Gateway-capable device joins the fabric for the first
time, the device type is not updated with an AG icon in the connectivity
map, resulting in the user not being able to perform the Accept
Changes operation solution.
Users cannot to perform operations such as Fabric Binding, Port Optics,
and Port Fencing when SSL is enabled and Port 80 is blocked.
The Call Home event description is not available in HP LAN call home
events.
HAFM references should be removed in HP LAN call home events, as
references to older releases should not be displayed.
If there is no fabric being managed by DCFM, the LIC error message
causes confusion because it does not provide an accurate reason for
the failure to launch certain dialogs.
42
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
nl
Workaround prior to this version:
nl
Launch Webtools from Internet Ex-
plorer.
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
nl
Workaround prior to this version:
nl
Use a different client IP.
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Fixed in DCFM 10.3.1
Advertisement
