Brocade Communications Systems Brocade 8/12c Installation Manual page 45

3. If there is an existing pcscd script in this directory, you can move and rename this file before you overwrite it.
> mv /etc/init.d/pcscd
4. Create a soft link using the following command.
> ln –s /opt/pcsc/pcscctl /etc/init.d/pcscd
The existing pcscd.org script in this directory implies that a different driver version exists. You can compare the
existing one with the one under /opt/pcsc/pcscd/sbin. If the size is different and the existing pcscd script
contains the following information, you must clean up the driver configuration. The example below shows a
different pscsd.org script and how to do the configuration cleanup. The configuration level is 2345, the start
priority is 25, and the stop priority is 88.
> more /etc/init.d/pcscd
#!/bin/sh
#
# pcscd
#
# chkconfig:
5. Remove the existing pcscd start priority file by deleting the file as SNNpcscd, where NN is the start priority. For
example, from the preceding step, the file name is S25pcscd.
> find /etc/.
> sync;sync;sync
> reboot
After the reboot, the new configuration from the /opt/pcsc/pcscctl file should be under the /etc/rc2.d,
/etc/rc3.d, /etc/rc4.d, and /etc/rc5.d directories.
lrwxrwxrwx 1 root root 15 Jul 28 01:50 S94pcscd -> ../init.d/pcscd
6. For the remote client, ensure that the Smart Card native library is linked to the one under /opt/pcsc/lib.
> cd /
> find . –name libpcsclite.so* -print
If the library libpcsclite.so* exists in multiple locations, you must ensure that there is only one library under /lib
or /usr/lib, and that it is linked to the library on /opt/pcsc/lib correctly. For example, to find a copy of the library
on /lib, use the following commands.
> cd /lib
> ls –al libpcsclite.so
If a copy of the library exists, either remove it or save it as a backup.
To find a copy of the library on /usr/lib, use the following commands.
> cd /usr/lib
> ls –al libpcsclite.so
Use this copy for the soft link.
> ln –s /opt/pcsc/lib/libpcsclite.so
Brocade Network Advisor Installation Guide
53-1002320-01
/etc/init.d/pcscd.org
Starts the pcscd Daemon
2345 25 88
–name "S25pcscd" –exec rm {} \; -print
Smart Card driver installation
/usr/lib/.
45 of 47