Brocade Communications Systems Brocade 8/12c Installation Manual page 34

License version configuration
9. Complete the following steps on the SMI Agent Configuration screen
FIGURE 11
SMI Agent Configuration screen
a. Enable the SMI Agent by selecting the Enable SMI Agent check box.
b. Enable the SLP by selecting the Enable SLP check box, if necessary.
Only enabled after you select the Enable SMI Agent check box.
c. Enable the SSL by selecting the Enable SSL check box, if necessary.
Only enabled after you select the Enable SMI Agent check box.
d. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989 if SSL Enabled is selected;
otherwise, the default is 5988).
e. Click Next.
10. (SAN with SMI Agent Enterprise) Select one of the following options on the SAN Network Size screen and click
Next:
NOTE
Port count is equal to the total number of switch ports across all fabrics.
•
Small (managing up to 2000 switch ports, 1-20 domains)
•
Medium (managing up to 5000 switch ports, 21-60 domains)
•
Large (managing up to 9000 switch ports, 61-120 domains)
11. Verify your configuration information on the Server Configuration Summary screen and click Next.
12. Complete the following steps on the Start Server screen.
a. Select the Start SMI Agent check box, if necessary.
Only enabled if you enabled SMI Agent on the SMI Agent Configuration screen.
b. Select the Start SLP check box, if necessary.
Only enabled if you enabled SLP on the SMI Agent Configuration screen.
c. Select the Start Client check box, if necessary.
d. Click Finish.
34 of 47
(Figure 11).
Brocade Network Advisor Installation Guide
53-1002320-01