Liquid Coolant; Silencer - Beta EVO 2T Instruction Manual

3
GB

LIQUID COOLANT

LIQUID COOLANT LIQUID COOLANT
LIQUID COOLANT LIQUID COOLANT
The level check must be performed with
the engine cold, as follows:
•Unscrew cap A A A A A and check the level of
the liquid
•lf the level is not visible in proximity of the
bottom of pipe proceed to add liquid
Circuit capacity is indicated in the table
on pag. 45. Use the liquids recommended
on the table on pag. 49.
WARNING: WARNING: WARNING: WARNING: WARNING:
To avoid burns, never unscrew the
radiator filler cap when the engine is hot.

SILENCER

SILENCER SILENCER
SILENCER SILENCER
If an increase in exhaust noise is noted,
check the silencer.
Proceed as follows:
•Unscrew the 3 screws B B B B B
•Take off end piece C C C C C
•Extract the fiber wool and substitute
with a new other (available as spare-
part)
•To reassemble, proceed in the reverse
order.
62