Configuring Threshold Monitoring; Threshold Types; Triggered Actions; Reaction Entry - HP 6125XLG Configuration Manual

Step
2. Create an NQA operation
and enter NQA operation
view.
3. Specify an NQA operation
type and enter its view.
4. Configure a reaction entry.
5. Exit to system view.
6. Associate Track with NQA.
7. Associate Track with an
application module.

Configuring threshold monitoring

Threshold types

An NQA operation supports the following threshold types:
• average—If the average value for the monitored performance metric either exceeds the upper
threshold or goes below the lower threshold, a threshold violation occurs.
accumulate—If the total number of times that the monitored performance metric is out of the
•
specified value range reaches or exceeds the specified threshold, a threshold violation occurs.
• consecutive—If the number of consecutive times that the monitored performance metric is out of the
specified value range reaches or exceeds the specified threshold, a threshold violation occurs.
Threshold violations for the average or accumulate threshold type are determined on a per NQA
operation basis, and threshold violations for the consecutive type are determined from the time the NQA
operation starts.

Triggered actions

The following actions may be triggered:
none—NQA displays results only on the terminal screen.
•
trigger-only—NQA displays results on the terminal screen, and meanwhile triggers other modules
•
for collaboration.

Reaction entry

In a reaction entry, a monitored element, a threshold type, and an action to be triggered are configured
to implement threshold monitoring.
The state of a reaction entry can be invalid, over-threshold, or below-threshold.
Command
nqa entry admin-name
operation-tag
type { icmp-echo | udp-echo }
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
quit
See High Availability
Configuration Guide.
See High Availability
Configuration Guide.
86
Remarks
By default, no NQA operation is
created.
N/A
By default, no reaction entry is
configured.
You cannot modify the content of
an existing reaction entry.
N/A
N/A
N/A