HP 6125XLG Configuration Manual page 72

In the above configuration, local5 is the name of the logging facility used by the log host to
receive logs. info is the informational level. The Linux system will store the log information with
a severity level equal to or higher than informational to the file /var/log/Device/info.log.
NOTE:
Follow these guidelines to edit the file /etc/syslog.conf:
Comments must be on a separate line and must begin with a pound sign (#).
•
• No redundant spaces are allowed after the file name.
The logging facility name and the information level specified in the /etc/syslog.conf file must be
•
identical to those configured on the device by using the info-center loghost and info-center
source commands. Otherwise, the log information might not be output properly to the log host.
d. Display the process ID of syslogd, kill the syslogd process, and then restart syslogd by using the
-r option to apply the new configuration.
Make sure the syslogd process is started with the -r option on a Linux log host.
# ps -ae | grep syslogd
147
# kill -9 147
# syslogd -r &
Now, the system can record log information into the specified file.
66