Reset Arp Snooping - HP 6125XLG Command Reference Manual

ip ip-address: Displays the ARP snooping entry for the specified IP address.
slot slot-number: Specifies an IRF member device. The slot-number argument is the member device ID in
the IRF fabric.
Usage guidelines
If you do not specify any keywords or arguments, the command displays all ARP snooping entries.
Examples
# Display ARP snooping entries for VLAN 2.
<Sysname> display arp snooping vlan 2
IP Address
3.3.3.3
3.3.3.4
# Display the number of the current ARP snooping entries.
<Sysname> display arp snooping count
Total entries: 2
Table 2 Command output
Field
IP Address
MAC Address
VLAN ID
Interface
Aging
Status
Total entries

reset arp snooping

Use reset arp snooping to remove ARP snooping entries.
Syntax
reset arp snooping [ ip ip-address | vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
Parameters
ip ip-address: Removes the ARP entry for a specific IP address.
vlan vlan-id: Removes the ARP entries for a specific VLAN. The vlan-id argument is in the range of 1 to
4094.
MAC Address VLAN ID Interface
0003-0003-0003 2
0004-0004-0004 2
Description
IP address in an ARP snooping entry.
MAC address in an ARP snooping entry.
ID of the VLAN to which the ARP snooping entry belongs.
Input interface in an ARP snooping entry.
Aging time for an ARP snooping entry in minutes.
Status of an ARP snooping entry: Valid, Invalid, Collision.
Number of ARP snooping entries.
Aging
XGE1/1/5 20
XGE1/1/6 5
19
Status
Valid
Invalid