Dhcp Snooping Information Remote-Id - HP 6125XLG Command Reference Manual

dhcp snooping information strategy
•

dhcp snooping information remote-id

Use dhcp snooping information remote-id to configure the padding content and code type for the
remote ID sub-option.
Use undo dhcp snooping information remote-id to restore the default.
Syntax
dhcp snooping information remote-id { normal [ format { ascii | hex } ] | [ vlan vlan-id ] { string
remote-id | sysname } }
undo dhcp snooping information remote-id [ vlan vlan-id ]
Default
The padding format is normal and the code type is hex.
Views
Ethernet interface view, aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-id: Specifies the VLAN ID as the remote ID sub-option.
string remote-id: Specifies the character string as the remote ID sub-option, a case-sensitive string of 1 to
63 characters.
sysname: Specifies the system name as the remote ID sub-option. You can configure the system name with
the sysname command in system view.
normal: Specifies the normal padding format. The padding content is the MAC address of the receiving
interface.
format: Specifies the code type for the remote ID sub-option. The default code type is hex.
ascii: Specifies the ASCII code type.
hex: Specifies the hex code type.
Usage guidelines
DHCP snooping uses ASCII to pad the specified string or system name for the remote ID sub-option. The
code type for the normal padding format is determined by this command.
If you use this command multiple times, the most recent configuration takes effect.
Examples
# Pad the remote ID sub-option with the character string device001.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet 1/1/5
[Sysname-Ten-GigabitEthernet1/1/5] dhcp snooping information enable
[Sysname-Ten-GigabitEthernet1/1/5] dhcp snooping information strategy replace
[Sysname-Ten-GigabitEthernet1/1/5] dhcp snooping information remote-id string device001
90