HP 6125G Configuration Manual page 43

Step
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authentication servers.
Specifying the HWTACACS authorization servers
You can specify one primary authorization server and up to one secondary authorization server for an
HWTACACS scheme. When the primary server is not available, any secondary server is used. In a
scenario where redundancy is not required, specify only the primary server.
Follow these guidelines when you specify HWTACACS authorization servers:
An HWTACACS server can function as the primary authorization server of one scheme and as the
•
secondary authorization server of another scheme at the same time.
The IP addresses of the primary and secondary authorization servers cannot be the same.
•
Otherwise, the configuration fails.
You can remove an authorization server only when no active TCP connection for sending
•
authorization packets is using it.
To specify HWTACACS authorization servers for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS
scheme view.
3. Specify HWTACACS
authorization servers.
Specifying the HWTACACS accounting servers and the relevant parameters
You can specify one primary accounting server and up to one secondary accounting server for an
HWTACACS scheme. When the primary server is not available, any secondary server is used. In a
scenario where redundancy is not required, specify only the primary server.
Command
hwtacacs scheme hwtacacs-scheme-name
•
Specify the primary HWTACACS
authentication server:
primary authentication ip-address
[ port-number | vpn-instance
vpn-instance-name ] *
•
Specify the secondary HWTACACS
authentication server:
secondary authentication ip-address
[ port-number | vpn-instance
vpn-instance-name ] *
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
authorization server:
primary authorization ip-address
[ port-number | vpn-instance
vpn-instance-name ] *
•
Specify the secondary HWTACACS
authorization server:
secondary authorization ip-address
[ port-number | vpn-instance
vpn-instance-name ] *
33
Remarks
N/A
Configure at least one
command.
No authentication server is
specified by default.
Remarks
N/A
N/A
Configure at least one command.
No authorization server is
specified by default.