Download Print this page

HP 6125G Configuration Manual: Configuring Password Control; Enabling Password Control

Hp 6125g & 6125g/xg blade switches security configuration guide-r2103.
Hide thumbs

Advertisement

For local user passwords, the settings with a smaller application range have a higher priority.
For super passwords, the settings configured specifically for super passwords, if any, override those
configured in system view.
Complete the following tasks to configure password control:
Task

Enabling password control

Setting global password control parameters
Setting user group password control parameters
Setting local user password control parameters
Setting super password control parameters
Setting a local user password in interactive mode

Configuring password control

Enabling password control
To enable password control functions, you need to:
Enable the password control feature in system view. Only after the password control feature is
1.
enabled globally, can password control configurations take effect.
Enable password control functions. Some password control functions need to be enabled
2.
individually after the password control feature is enabled globally. These functions include:
Password aging
Minimum password length
Password history
Password composition checking
You must enable a function for its relevant configurations to take effect.
To enable password control:
Step
1.
Enter system view.
2.
Enable the password control
feature.
3.
Enable a password control
function individually.
After global password control is enabled, local user passwords configured on the device are not
displayed when you use the corresponding display command.
About the minimum password length:
When global password control is disabled, the minimum password length is one character.
Command
system-view
password-control enable
password-control { aging |
composition | history | length }
enable
140
Remarks
Required
Optional
Optional
Optional
Optional
Optional
Remarks
N/A
Disabled by default.
Optional.
All of the four password control
functions are enabled by default.

Advertisement

Troubleshooting

   Related Manuals for HP 6125G

Comments to this Manuals

Symbols: 0
Latest comments: