Introduction - Radio Shack 2-in-1 Remote Control Owner's Manual

X

Introduction

Your Radio Shack 2-in-1 Remote Control was designed
to control the most commonly-used functions on your TV
and cable converter.
When you set up the remote control, its command keys
operate the same as the keys on your original TV and
Cable remote controls. For example, the
works like the POWER ON/OFF key on your original TV
remote control.
Key
P Use to program the remote control.
POWER Operate the same as the corre-
VOL + sponding keys on your original
VOL –
remote controls.
CH +
CH –
LAST
MUTE
ENTER
(0–9)
+ 100
A/B
TV Use to set up the remote control to
CBL replace your original remote con-
trols. Also use in normal operation to
remotely select a desired device to
control.
Note: This remote control might not be able to duplicate
some of your original remote control's seldom-used
functions.
4
Introduction
key
POWER
Function