Page 1
15-309 User’s Guide Slim Universal Remote Control Thank you for purchasing your Slim Universal Remote Control from RadioShack. Please read this user’s guide before installing, setting up, and using your new remote control.
Package contents Code List Remote control with battery Features • Operates up to three devices • Controls TV volume regardless of mode Remove Plastic Tab Your remote control comes with a 3V, CR2032 button cell battery. Remove the plastic tab to enable battery contact before using your remote control for the first time.
Page 4
Red LED MUTE – Press to mute the sound. CC – Closed caption. G – Turn on /off a selected device. Device Keys – Press to select a CH+/– Select the next or device to control: TV, VCR/DVD, previous channel. Select the Set Top Box (STB).
Setup Your universal remote can operate a TV, set top box (STB), VCR or DVD player. Set up your universal remote in one of three ways: • Brand Code Setup: Directly enter the device code from the Code List. Try each code until you find one that works for your device.
Page 6
3. On your universal remote, press and hold SET, and then press a device key (TV, VCR/DVD or STB). The red LED lights and stays lit, indicating that the remote is in setup mode. Release both buttons. Note: Do not hold down the keys for longer than 3 seconds or the remote enters auto search mode.
Auto Code Search Auto Code Search automatically sends device codes to the device that you want to control. 1. Power on the device that you want to control. For VCRs and DVD players, you must insert a tape or disc. 2. On your universal remote, press and hold SET, then press and hold a device key (TV, VCR/DVD or STB).
Manual Code Search Manual Code Search sends codes to the device you want to control one by one at the touch of the G button. 1. Power on the device that you want to control. For VCRs and DVD players, you must insert a tape or disc.
Notes: • During a search, you can press SET to change search direction from forward to backward or vice versa. • If no keys are pressed in 10 seconds, search stops. Operation Check Current Brand Code For future reference and to save time if you ever need to set up your remote again, retrieve and write down your device codes for each device key on your universal remote. Complete the following steps to check the code number for a specific device.
3. To check the second digit, press and hold SET, then press 2. The red LED will flash repeatedly to indicate the second digit. 4. To check the third digit, press and hold SET, then press 3. The red LED will flash repeatedly to indicate the third digit.
Lock Volume and Mute You can lock the volume and mute functions so they work only with one device. For example, if you’ve locked the volume and mute functions to the TV device key on your universal remote, you can only control TV volume, even if you are in STB or VCR/DVD modes.
Replace the Battery When the control range decreases, replace the battery with a new one. 1. Use a coin to turn the battery compartment cover countercloskwise to open it. 2. Insert a new 3V, CR2032 button cell battery, matching the polarity symbols (+ / –) marked inside.
Additional Information Troubleshooting Problem Solution I press SET and the appropriate Press and hold SET, then press the appropriate key. key at the same time but the The remote will not enter the desired mode if buttons are remote still doesn’t work. pressed in the wrong order.
Page 14
Problem Solution I can’t get the remote to pair with • TVs and other devices may power off differently. Make my device sure you know how yours powers off so you can press the appropriate key at the correct time. Otherwise, the remote will not pair with the device and you will have to try again. • Try all the 3 digital-device code one by one under the same brand until all or most keys work properly.
• Consult your local RadioShack store or an experienced electronics technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your remote. Changes or modifica- tions not expressly approved by RadioShack may cause interference and void the user’s authority to operate the equipment.
Should a problem occur that is covered by this warranty, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store in the U.S. RadioShack will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product;...
Page 17
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RADIOSHACK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
Need help?
Do you have a question about the 15-309 and is the answer not in the manual?
Questions and answers