Stored Station Or System Speed Dial Calling - Toshiba DKT2004-CT User Manual

Speed Dial –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4. Enter the telephone number
(up to 20 digits).
5. To store [DN] button access,
followed by a CO Line access
code before the telephone
number to allow one-touch
dialing of telephone numbers,
See
92.
6. Press
Repeat this procedure to replace
stored telephone numbers with
new ones. To clear a Speed Dial
entry, repeat this procedure,
skipping Step 4.

Stored Station or System Speed Dial Calling

You can call stored Speed Dial numbers by pressing a button or by entering a Speed Dial code.
To store speed dial numbers, see the previous instructions.
assigned to stations in system programming.
To call with a Speed Dial button
1. Access a line. (See
Codes" on Page 92
information on CO Line
buttons and access codes.)
2. Press
78
"Access Codes" on Page
.
"Access
for
.
The number is stored. The stored number is dialed
when you press , or
Dial access code.
The system dials the telephone number assigned to the
button.
Strata DK Cordless Digital Telephone 5/99
and the Speed
and buttons are