Placing/Retrieving Calls On Hold - Toshiba DKT2004-CT User Manual

Quick Reference –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Placing/Retrieving Calls on Hold

Calls on hold may be released automatically if the held party hangs up and the network
provides a hold-release signal. See
To hold a call that appears on a Line or [DN] button
Press
To place a Handsfree Answerback call on hold
1. Press
[DN] to answer the call.
2. Press
To retrieve the held call
Press
is on hold.
44
Page 45
. The Line or [DN] LED flashes green at the on-hold
rate.
You hear recall tone when your station is idle (or two
times only when busy) if you do not retrieve the held
call before "Hold the recall" time set in system
programming expires.
or the flashing You are connected to the incoming call.
. The Line or [DN] LED flashes green at the on-hold
rate.
You hear recall tone when your station is idle (or two
times only when busy) if you do not retrieve the held
call before "Hold the recall" time set in system
programming expires.
or the [DN] which The Line or [DN] LED
flashes at the on-hold
rate.
for the Automatic Hold feature.
Strata DK Cordless Digital Telephone 5/99
H O L D
N 0 . N N N
1195