Storing To Speed Dial Memory; Wall Mount Template - Toshiba SG-1600 Owner's Manual

STORING TO SPEED DIAL MEMORY

1
Pick up the handset and press
to bring up the number you wish to store into Speed Dial
memory.
2
Press .
MEM
The LCD displays the following screen.
3
Enter a two-digit number (01-20) or press
memory location.
4
Press
SELECT
is stored. Press
If you select a memory location which is already stored:
(1) The LCD displays the following prompt:
(2) Press
.
SELECT
A confirmation beep sounds and the new data overwrites the
old data. The LCD returns to the Caller ID display screen.
If you select
The LCD returns to the Caller ID display screen.
Press to return to standby mode.
CID
CUT
•
•
CALLER ID/CALL WAITING
. A confirmation beep sounds and the Caller ID data
to return to standby mode.
CID
to select and press
:

Wall mount template

IMPORTANT:
Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate a stud for
maximum support of your telephone.
Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
. Then, press
CID
,
s s
or
s s
to select
CUT
33