Co Line Access Codes - Toshiba DKT2004-CT User Manual

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a
button, you can enter the appropriate code listed in
You can also store the code on a
access code onto a Speed Dial code, enter
, enter
In some systems,
System users are required to dial
programmed with LCR, you may not hear internal dial tone, depending on system
programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Press [PDN] + CO Line Access Code.
Table 1 CO Line Access Codes
DK14
DK16e
DK40
DK424 (RCTUA)
DK424 (RCTUBA/BB)
DK424 (RCTUC/D)
DK424 (RCTUE/F)
Notes
accesses LCR or general line groups.
Appendix
).
is used as a general group code or to access Least Cost Routing (LCR).
in order to access an outside line. If you press in a system
System
accesses line groups 1~16, respectively.
accesses individual lines 1~200, respectively.
Table 1
button for one-touch access. If you are storing a CO line
before the CO access code (e.g., to store code
or
or
or
or
or
or
or
CO Line Access Codes
to access an outside line.
CO Line Access Codes
or
or
or
or
or
or
or
or
95