Call Park Orbits (Release 3 Or Later) - Toshiba DKT2004-CT User Manual

Call Park Orbits (Release 3 or later)

Call Park Orbits
The Call Park Orbit feature enables you to hold a call temporarily in an orbit for anyone to
retrieve. You can have the same station or a different station. There are 20 General Park Orbits
for the system and one Personal Park Orbit for each station. Once you have parked a call in an
orbit, you can:
Hang up and retrieve the parked call at a later time.
Originate another call.
Access a voice paging device to announce the parked call for pickup from another station.
If you park a call and your station is idle while the system Call Park recall timer expires, the
parked call automatically recalls to your station. If your station is busy, the parked call camps
onto your station.
To park a call
1. Press
on an internal or outside call.
...or
2. Enter a General Orbit
Number (
...or enter a valid [PDN].
3. Press
To pick up or retrieve a parked call
1. Press the parked
or
...or [DN] +
2. Enter the Orbit Number or the
[PDN] where the call is
parked.
58
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(Release 3 or later)
while The Line or [DN] LED flashes at the
consultation-hold rate until you enter the orbit
number.
+ .
After dialing the orbit number, you hear a short dial
~ )
tone and the call is parked. The Line LED flashes at
the Hold rate, or the [DN] LED goes out.
.
, [DN] The Line LED flashes at an on-hold rate (the [DN]
LED is off). The call is parked at the orbit with the
orbit number that you have just entered.
.
The Orbit Number is usually provided in the paging
announcement. The Line or [DN] LED lights steady
when the call is picked up or retrieved.
Strata DK Cordless Digital Telephone 5/99