Calling The Attendant Console; Tone/Pulse Dialing - Toshiba DKT2004-CT User Manual

Quick Reference –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Calling the Attendant Console

There are three ways to call the Attendant Console depending upon system programming. You
can call any Attendant Console, a particular Attendant Console, or all Attendant Consoles.
To call any console
Press a [DN] + .
To call a specific console
Press a [DN] + the console's
[DN] ______.
To make an emergency call to all consoles
Press [DN] + the emergency
access code

Tone/Pulse Dialing

With some older Central Offices, you may have to make calls using rotary dial pulses on
outside lines. To access remote equipment (such as an answering machine) requiring Dual-
tone Multi-frequency (DTMF) tones while on these lines, you must set your telephone for tone
dialing after you have dialed the telephone number. Your telephone must have a
button assigned in system programming to access this feature.
To change to Tone Dialing
1. Dial a telephone number
on a line programmed for
rotary dial pulses.
2. Press
in progress.
46
.
Although the line is programmed for rotary dial pulses,
you can access the line and dial the telephone number like
any other call described in this guide.
The Tone Dial Select LED lights steady, and you can send
while the call is
DTMF tones with your dial pad. If the LED is off, tone
dialing is not selected, and you cannot send DTMF tones.
The call rings the Attendant Console. Dial 0 calls
rotate between the consoles if more than one console
is installed.
The call rings the console's Incoming [DN] (
button.
Your System Administrator can provide the
Note
Attendant Console Incoming [DNs].
The call rings all consoles (
Strata DK Cordless Digital Telephone 5/99
)
button).