Specifications - TEC MA-1535 series Owner's Manual

13. SPECIFICATIONS

13. SPECIFICATIONS
Item
Size
Weight
Power Requirement:
Ambient Temperature
Relative Humidity
Memory Protection
Paper Width
Outer Roll Diameter
Paper Type
CAUTION!
Use only paper which meets specified requirements. Use of non-specified paper may shorten
the head life of the printer, resulting in problems with print quality, cause a paper feed failure or
shorten the cutter life. All paper should be handled with care to avoid any damage to the paper.
Read the following guideline carefully.
• Do not store the paper for longer than the manufacturer's recommended shelf life.
• Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight,
high temperature, high humidity, dust or gas.
• A contact of chemical or oil may discolour or erase the printed record.
• Rubbing the paper hard with nail or hard object may discolour the paper.
• The paper end should not be pasted to the core.
For further information please contact your authorised TOSHIBA TEC representative or authorised
paper manufacturer.
410 mm (width) x 430 mm (depth) x 335 mm (height) (height including
rubber feet)
12.5 kg
AC 117V±10%, 60 Hz±10%, 0.46A
AC 220 – 230V±10%, 50/60Hz±10%, 0.24A
AC 240V±10%, 50/60Hz±10%, 0.20A
0°C to 34°C
10% to 80% (No condensation)
Long lasting rechargeable lithium battery is provided.
57.5±0.5mm
Max. ∅80mm
Thermal paper rolled with the print side facing outside.
Only paper rolled onto a core is acceptable, however, the paper end
should not be pasted to the core.
Recommended paper type: KF50 (KANZAN)
13- 1
Description
TF50KS-E2C (Nippon Paper Industries)
P-350 (KSP)
EO1-11148
13. SPECIFICATIONS