Displaying The Date And Time; No-Sale - TEC MA-1535 series Owner's Manual

9. REGISTERING PROCEDURE AND PRINT FORMAT
9.1

Displaying the Date and Time

Each time the [X/TIME] key is pressed in the REG mode, time and date are displayed by turns in the
AMOUNT area of the display. When the Control Lock position is changed or any entry operation starts,
the displayed date or time disappears.
OPERATION (Must be operated outside a sale)
[X/TIME]
Time is displayed.
Display Format:
24-hour time system
TIME
9.2

No-Sale

A No-Sale transaction is used to open the cash drawer without relating to any sales, such as, to
exchange, to test the receipt/journal print condition, etc. This operation count is added to the No-Sale
Counter of daily report.
OPERATION
(Must be operated outside a sale)
[#/NS] ............The drawer opens and a No-Sale Receipt is issued.
Max. 7 lines of Store Message
and Commercial Message
(a rubber stamp may replace it.)
Date (Day-Month-Year order in this
sample)
No-Sale Receipt Header
Name of the Cashier who is operating
the register. ("CL01" is the standard
setting.)
NOTE: The print format samples in this manual are not copies of actual receipts printed on an ECR but
are merely indications of print formats. In those format samples, the bold-face characters indicate
Double-sized characters on actual receipts issued by the ECR. Also note that each Double-sized
character on actual receipts will be printed a half-character right from the print format sample in
this manual.
[X/TIME]
Date is displayed.
12-hour time system
TIME
--- Receipt Print Format ---
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
24-01-2002
NO-SALE
JONES 0069
9- 2
Date
PM DATE
#1234
Register No.
Consecutive No.
09:58TM
Current Time
EO1-11148
9.1 Displaying the Date and Time